<![CDATA[HONG JI PRECISION MACHINERY LTD]]> http://www.hong-ji.com.tw Tue, 8 May 2018 09:57:35 +0800 3600 News update(2018/May/18 17:14:10) http://www.hong-ji.com.tw/supplier_news.html News update (2018/May/18 17:14:10) news Fri, 18 May 2018 17:14:10 +0800 <![CDATA[Deep Hole Drilling Machine Deep-hole drilling machine (CNC ST-3000)(2015/Nov/19 11:21:01)]]> http://www.hong-ji.com.tw/-ST-3000.html?CID=1_1 HONG JI's new Deep-Hole Drilling Machine, CNC ST-3000. With drilling capacity from ø5mmto ø40mmand the max. drilling length3000mm, this bed type of machine is suitable for drilling water line of big plastic moulds, oil channel of spindle sleeve for heavy-duty turning machine and parts of hydraulic press machine. All axes are harden slide ways made by cast iron and done surface hardness to HRC60 to offer a stable performance as drilling big holes with3000mmlength. Equipped with high-precisionGermanybearings in spindle to offer stable spindle rotation to 6000RPM. Dimension of worktable is 3000x1000mmand be loaded 20tons components owing to200mmwidth of harden slide way of X-axe. 2 meters width of main column and two sub-columns to support Y-axe movement, hence, still processing is the same stable as drilling holes in high position of component. The machine structure is not only ridge but also strong, total weight of machine is 40tons. The table below has more  detail information, so please feel free and contact us for more information today!


(2015/Nov/19 11:21:01)]]>
Thu, 19 Nov 2015 11:21:01 +0800
<![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-2000)(2017/Aug/9 12:02:57)]]> http://www.hong-ji.com.tw/gun_drill.html?CID=1_1 The bed type drilling machine is under casting construction with maximum 2000mm of drilling length.  The machine has 3 axis to work for different applications like aerospace parts, heat exchanger, plastic moulds or irregular components.  The machine can also load for weight at maximum 15000kgs for your demands, and it can also meet your need of tapping and milling.  The table below has more  detail information, so please feel free and contact us for more information today!


 

(2017/Aug/9 12:02:57)]]>
Wed, 9 Aug 2017 12:02:57 +0800
<![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-1500)(2015/Nov/19 11:21:16)]]> http://www.hong-ji.com.tw/01-hole_drilling_machine.html?CID=1_1 This type of machine is designed for drilling molds in big size or accomplish irregular components.  The machine is made by cast iron, which is ideal for waterlines production, heat and ejector pin holes or hydraulic manifold.   With years of experiences, we have servo motor and ball screw for feeding to insure the feed rate smoothly.   Besides, the automatic lubrication pump is also served as standard accessory to make sure all the bearing surface are well lubricated.  If you are interested in more information about the machine, just feel free and contact us today!





(2015/Nov/19 11:21:16)]]>
Thu, 19 Nov 2015 11:21:16 +0800
<![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-1200)(2015/Nov/19 11:21:48)]]> http://www.hong-ji.com.tw/deep_hole_drilling_machine.html?CID=1_1 The deep hole drilling machine designed as bed type is casting constructed for manufacturing injection hole or coolant hole for moulds or plastic moulds.  The machine can also meet your need of producing quality engine blocks or other components for aerospace.  This machine has 4 axis for ranges of drilling capacitiy, and the drilling length is at maximum 1200mm for various applications.  Here is the video of brief introduction on our machine, please feel free and contact us for more today! 


 

 

 

(2015/Nov/19 11:21:48)]]>
Thu, 19 Nov 2015 11:21:48 +0800
<![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-1000)(2015/Nov/19 11:22:04)]]> http://www.hong-ji.com.tw/03-hole_drilling_machine.html?CID=1_1 In order to accomplish the various demands on mould parts, we offer you quality deep hole drilling machine to help you acccomplish your design.  We have 600x1000mm work table to bear 1000kgs of the loading weight, and the maximum length for the drilling is at 1000mm as well.  We also designed the machine to work in 3 or 4 axis to achieve not only drilling but also milling and tapping.  


CNC Deep Hole Drilling Machine


(2015/Nov/19 11:22:04)]]>
Thu, 19 Nov 2015 11:22:04 +0800
<![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-500)(2015/Nov/19 11:22:29)]]> http://www.hong-ji.com.tw/Product-200711917126.html?CID=1_1  

 

 

The knee type deep hole drilling machine has 3 axis, X, Y and Z with different travel.  The machine provides 600x1000mm of the work table to help you accomplish your design on various applications.  Mostly, the machine is available for moulds like coolant hole or injection hole.  We offer precise machines with cost-effective advantage to support your business. Please feel free and contact us for more today!

 

 

 



(2015/Nov/19 11:22:29)]]>
Thu, 19 Nov 2015 11:22:29 +0800
<![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-500B)(2015/Nov/19 11:22:48)]]> http://www.hong-ji.com.tw/06-hole_drilling_machine.html?CID=1_1 The deep hole drilling machine with knee type has three axis travelling in the machine.  With 500mm of the X axis, 350mm of the Y axis and 500mm of the Z axis, the drilling machine performs efficiently in various applications.  Except for the making of the moulds, the machine is also suitable to make parts for automobile or aerospace.  We provide negotiable quantity for the machines, so please feel free and contact us for more information.

 


 

(2015/Nov/19 11:22:48)]]>
Thu, 19 Nov 2015 11:22:48 +0800
<![CDATA[Deep Hole Drilling Machine Knee Type Deep Hole Drilling Machine (CNC ST-500D)(2015/Nov/17 14:22:26)]]> http://www.hong-ji.com.tw/st500d.html?CID=1_1
  • Spindle number: 4 Nos
  • Axis number: 3 Axis
  • Drilling capacity: Ø3mm~Ø12mm
  • Max. drilling length: 500mm
  • Worktable: 600x1000mm
  • Max. loading weight on table: 500kgs
  • X/Y/Z axis travel: 500mm/300mm/\500mm


    Applications:

  • Automobile parts
  • Parts for mass production
     
  • (2015/Nov/17 14:22:26)]]>
    Tue, 17 Nov 2015 14:22:26 +0800
    <![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-500G)(2015/Nov/19 11:23:03)]]> http://www.hong-ji.com.tw/Knee-Type-Deep-Hole-Drilling-Machine.html?CID=1_1 The deep hole drilling machine with 6 spindles has three axis travelling in the machine.  With 500mm of the X axis, 300mm of the Y axis and 500mm of the Z axis, the drilling machine performs efficiently in various applications.  Except for the making of the moulds, the machine is also suitable to make parts for automobile or aerospace.  We provide negotiable quantity for the machines, so please feel free and contact us for more information.

    (2015/Nov/19 11:23:03)]]>
    Thu, 19 Nov 2015 11:23:03 +0800
    <![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (PLC ST-1000)(2015/Nov/19 11:23:17)]]> http://www.hong-ji.com.tw/04-hole_drilling_machine.html?CID=1_1 We offer economic deep hole drilling machine for customers with different demands.  The machine is designed to run under the control of HMI, which requires coolant pump with pressure ranges from 10 to 100 kg/cm².  The 600 x 1000mm work table is available to bear 1000kgs during the processing, and the table has three axis on it to make your work even more precise.

     


     

    (2015/Nov/19 11:23:17)]]>
    Thu, 19 Nov 2015 11:23:17 +0800
    <![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (PLC ST-500B)(2015/Nov/19 11:23:34)]]> http://www.hong-ji.com.tw/05-hole_drilling_machine.html?CID=1_1 PLC ST-500B is an economic deep-hole drilling machine with 2 Nos spindles. Equipped with HMI control, PLC ST-1000B is easy to use efficiently. Worktable with optimal scale, position of X axe and Y axe is high precision. This machine is suitable to drill water holed of plastic mould. Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.  If you are interested in our machines, please feel free contact us for more.

     


     

    (2015/Nov/19 11:23:34)]]>
    Thu, 19 Nov 2015 11:23:34 +0800
    <![CDATA[Deep Hole Drilling Machine Deep Hole Drilling Machine (CNC ST-2500)(2015/Nov/19 11:23:57)]]> http://www.hong-ji.com.tw/Product-201012915378.html?CID=1_1 Except for bed type and knee type, we also offer you the column-moving type for further demands. This type of machines are suitable for the production of heavy components like heat-exchanger or coolant block.   With moving-column design, the table designed in 3,000 x 2,000mm, which is the largest size in this series, is available to load heavy component, without considering the weight of component.  Please feel free and contact us for more information today!

     

    (2015/Nov/19 11:23:57)]]>
    Thu, 19 Nov 2015 11:23:57 +0800
    <![CDATA[Deep Hole Drilling Machine Knee Type Deep Hole Drilling Machine (PLC ST-1000B)(2015/Nov/20 14:57:36)]]> http://www.hong-ji.com.tw/PLC_ST-500B.html?CID=1_1
  • Economy model of Knee-Type Deep-Hole Drilling Machine
  • Spindle number: 2 Nos
  • Axis number: 3 Axis
  • Drilling capacity: Ø3 ~ Ø25mm
  • Max. drilling length: 1000mm
  • Worktable: 600x1000mm
  • Max. loading weight on table: 1,000kgs
  • X/Y/Z axis travel: 500mm/350mm/1000mm


    Applications:

  • Coolant hole for moulds
  • Injection hole for plastic moulds
  • Automobile parts
  • Aerospace parts
  • Irregular components
     
  • (2015/Nov/20 14:57:36)]]>
    Fri, 20 Nov 2015 14:57:36 +0800
    <![CDATA[Deep Hole Drilling Machine Knee Type Deep Hole Drilling Machine (PLC ST-500)(2015/Nov/20 14:59:44)]]> http://www.hong-ji.com.tw/PLC_ST-500.html?CID=1_1
  • Economy model of Knee-Type Deep-Hole Drilling Machine
  • Spindle number: 1 No
  • Axis number: 3 Axis
  • Drilling capacity: Ø3 mm~Ø25mm
  • Max. drilling length: 500mm
  • Worktable: 600x1000mm
  • Max. loading weight on table: 500kgs
  • X/Y/Z axis travel: 500mm/300mm/500mm


    Applications:

  • Coolant hole for moulds
  • Injection hole for plastic moulds
  • Automobile parts
  • Aerospace parts
  • Irregular components
     
  • (2015/Nov/20 14:59:44)]]>
    Fri, 20 Nov 2015 14:59:44 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLA-1000D)(2015/Nov/10 17:21:04)]]> http://www.hong-ji.com.tw/gun_drilling_machine.html?CID=2_2 The gun drilling machine is known as deep hole drilling machine to drill workpiece a precision hole for metal cutting industry such as machine tool or die. This specific equipment supplied by Hong Ji is special for its round bar material. The gun drilling machine is an auto-feeding equipment with four spindles. It is a mass-production type with qualified automatic work piece-feeding system.

    The equipment offers mass production in drilling single size of round bar. Customer accesses efficiency while operating their works with Hong Ji gun drilling machine. On the other hand, with auto-loading and unloading system, operator just needs to put work pieces on the conveyer. Then all work will be done in the equipment automatically.

    Also, it’s worth mentioning that the full cover of the equipment is as its standard accessory to prevent oil-spray, and to keep the working area clean. As for the filtration system, we use drum-type paper filters, which is also one of the features the gun drilling machine has.


    (2015/Nov/10 17:21:04)]]>
    Tue, 10 Nov 2015 17:21:04 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-1000)(2015/Nov/10 17:34:28)]]> http://www.hong-ji.com.tw/Product-2008328154054.html?CID=2_2 SL-1000 gun drilling machine is economical for your business.  We have the most efficient motor to work the machine, and this machine is ideal for you to drill different kinds of round bar.  The motor drives every workpiece counter-rotating to increase concentricity.  Besides, the movable rear fixture base design is convenient during the production process since the base can help you move per length of the round bar.  Please feel free to contact us for more information today.
     

     

    (2015/Nov/10 17:34:28)]]>
    Tue, 10 Nov 2015 17:34:28 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-500)(2015/Nov/10 17:26:22)]]> http://www.hong-ji.com.tw/10-hole_drilling_machine.html?CID=2_2  

     

     

    SL-500 model gun drilling machine is designed with automatic lubrication pump provides you effective drilling in the production process.  In order to make you feel more convenient during working, we have outer controller and MPG for you.  The servo motor of Z-axis helps you drill stroke effectively, and the speed ranges from 10 to 150 mm/min. The hydraulic system provides cooling function to the machine, and the coolant tank has 800L of the capacity.  Please feel free and contact us for more information today.

     

     

     


     

    (2015/Nov/10 17:26:22)]]>
    Tue, 10 Nov 2015 17:26:22 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-1000B)(2014/May/7 15:02:49)]]> http://www.hong-ji.com.tw/Deep-Hole-Drilling-Machine.html?CID=2_2 Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.
    To increase the concentricity of hole, spindle and componet are rotating as drilling.
    The fixture system is with manual chucks. Hydraulic chucks are available.
    Slide ways are hot-treatment to hardness HRC 60 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.
    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.
    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.
    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.






    (2014/May/7 15:02:49)]]>
    Wed, 7 May 2014 15:02:49 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-500D)(2015/Nov/10 17:46:27)]]> http://www.hong-ji.com.tw/11-hole_drilling_machine.html?CID=2_2 Special for round bar material. (Four spindles, Manual clamping)

    Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.

    High-quality ball screw of feed-axe with Mitsubishi PLC and Yaskawa sevorcontrol, working process is stable and precision.

    The design of controller panel is user-friendly. Working parameter set up step by step on the controller panel, it is easy to use for operator.

    Slide ways are hot-treatment to hardness HRC 52 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.

    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.

    With special design in fixture device( hydraulic clamp or hydraulic V-type supporter), set up workpieces are faster and easier.

    With outer-controller and MPG, operator uses the machine very convenient.

    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.

    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.

    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.

     
     

    (2015/Nov/10 17:46:27)]]>
    Tue, 10 Nov 2015 17:46:27 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-1000D)(2014/May/7 13:52:04)]]> http://www.hong-ji.com.tw/Product-2008328155149.html?CID=2_2 Special for round bar material. (Four spindles hydraulic clamping)

    Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.

    High-quality ball screw of feed-axe with Mitsubishi PLC and Yaskawa sevorcontrol, working process is stable and precision.

    The design of controller panel is user-friendly. Working parameter set up step by step on the controller panel, it is easy to use for operator.

    Slide ways are hot-treatment to hardness HRC 60 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.

    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.

    With special design in fixture device( hydraulic clamp or hydraulic V-type supporter), set up workpieces are faster and easier.

    With outer-controller and MPG, operator uses the machine very convenient.

    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.

    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.

    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.
     


     

    (2014/May/7 13:52:04)]]>
    Wed, 7 May 2014 13:52:04 +0800
    <![CDATA[Gun Drilling Machine Gun drilling machine (SL-2000)(2014/Sep/23 10:32:08)]]> http://www.hong-ji.com.tw/SL-2000.html?CID=2_2 SL-2000 gun drilling machine is economical for your business.  We have the most efficient motor to work the machine, and this machine is ideal for you to drill different kinds of round bar.  The motor drives every workpiece counter-rotating to increase concentricity.  Besides, the movable rear fixture base design is convenient during the production process since the base can help you move per length of the round bar.  Please feel free to contact us for more information today.



    
    (2014/Sep/23 10:32:08)]]>
    Tue, 23 Sep 2014 10:32:08 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-1500)(2014/May/7 13:13:37)]]> http://www.hong-ji.com.tw/PLC-Deep-Hole-Drilling-Machine.html?CID=2_2 Special for long round bar material. (Single spindle, Manual clamping)
    Spindle and component are rotating as drilling to increase the concentricity of hole.
    With manual three-jaw chuck, clamping range is flexible.
    With movable rear fixture base, the base can be moved per the length of round bar.
    Fixture device also can be used hydraulic chunks per the shape of bar.









     
    (2014/May/7 13:13:37)]]>
    Wed, 7 May 2014 13:13:37 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLY-1000D)(2014/May/7 14:01:45)]]> http://www.hong-ji.com.tw/PLC-Deep-Hole-Drilling-Machine2.html?CID=2_2 Special for round bar material. (Four spindles hydraulic supporter, workpieces driven by rear)
    With four sipndles, the machine offers mass production, job-doing efficiently.
    With hydraulic V-type supporters, operator just needs to put workpiece on the rack between the V-type supporters, then workpieces will be fixed auotmatically.
    With movable rear fixture base, the base can be moved per the length of round bar.
    Equipped with the motor in the rear of machine, the motor drives workpiece counter-rotating to increase concentricity










     
    (2014/May/7 14:01:45)]]>
    Wed, 7 May 2014 14:01:45 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLY-500B)(2015/Nov/10 17:31:18)]]> http://www.hong-ji.com.tw/07-hole_drilling_machine.html?CID=2_2 Suitable for mould & irregular workpieces. (Double spindles)

    Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.

    High-quality ball screw of feed-axe with Mitsubishi PLC and Yaskawa sevorcontrol, working process is stable and precision.

    The design of controller panel is user-friendly. Working parameter set up step by step on the controller panel, it is easy to use for operator.

    Slide ways are hot-treatment to hardness HRC 60 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.

    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.

    With special design in fixture device( hydraulic clamp or hydraulic V-type supporter), set up workpieces are faster and easier.

    With outer-controller and MPG, operator uses the machine very convenient.

    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.

    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.

    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.

     


     

    (2015/Nov/10 17:31:18)]]>
    Tue, 10 Nov 2015 17:31:18 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLY-500D)(2014/May/7 13:17:22)]]> http://www.hong-ji.com.tw/Product-200751075642.html?CID=2_2 Special for round bar material. (Four spindles hydraulic supporter, workpieces driven by rear)

    With four sipndles, the machine offers mass production, job-doing efficiently.

    With hydraulic V-type supporters, operator just needs to put workpiece on the rack between the V-type supporters, then workpieces will be fixed auotmatically.

    With movable rear fixture base, the base can be moved per the length of round bar.

    Equipped with the motor in the rear of machine, the motor drives workpiece counter-rotating to increase concentricity.








     

    (2014/May/7 13:17:22)]]>
    Wed, 7 May 2014 13:17:22 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLY-1000B)(2014/May/7 14:10:20)]]> http://www.hong-ji.com.tw/09-hole_drilling_machine.html?CID=2_2 Special for round bar material. (Double spindles hydraulic supporter, workpieces driven by rear)

    Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.

    High-quality ball screw of feed-axe with Mitsubishi PLC and Yaskawa sevorcontrol, working process is stable and precision.

    The design of controller panel is user-friendly. Working parameter set up step by step on the controller panel, it is easy to use for operator.

    Slide ways are hot-treatment to hardness HRC 60 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.

    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.

    With special design in fixture device( hydraulic clamp or hydraulic V-type supporter), set up workpieces are faster and easier.

    With outer-controller and MPG, operator uses the machine very convenient.

    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.

    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.

    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.



     

    (2014/May/7 14:10:20)]]>
    Wed, 7 May 2014 14:10:20 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLY-500/SLY-1000)(2014/May/7 13:07:56)]]> http://www.hong-ji.com.tw/08-hole_drilling_machine.html?CID=2_2 Special for round bar material. (Auto-Feed)

    Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.

    High-quality ball screw of feed-axe with Mitsubishi PLC and Yaskawa sevorcontrol, working process is stable and precision.

    The design of controller panel is user-friendly. Working parameter set up step by step on the controller panel, it is easy to use for operator.

    Slide ways are hot-treatment to hardness HRC 60 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.

    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.

    With special design in fixture device( hydraulic clamp or hydraulic V-type supporter), set up workpieces are faster and easier.

    With outer-controller and MPG, operator uses the machine very convenient.

    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.

    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.

    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.



     

    (2014/May/7 13:07:56)]]>
    Wed, 7 May 2014 13:07:56 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SLY-500Z)(2014/May/7 16:53:13)]]> http://www.hong-ji.com.tw/Gun-Drilling-Machine.html?CID=2_2 With 8 Nos spindles for special requirements.
    There are four spindles in each side (Total eight spindles in the machine), drilling components from both sides at the same time to reduce the process time and increase the production.








     

    (2014/May/7 16:53:13)]]>
    Wed, 7 May 2014 16:53:13 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SE-500B/SE-1000B)(2014/May/7 13:37:04)]]> http://www.hong-ji.com.tw/13-hole_drilling_machine.html?CID=2_2 Economy type of deep-hole drilling machine.
    This machine is suitable for center-hole drillng, like eject hole, automobile parts, medical parts, ect.
    With high-quality ball screw and servo motor for feed-axis, moving and drilling is stable and precision.
    With three-jaw manual chucks, clamping part is flexible. Hydraulic chuck is available.
    As processing, spindle is rotating and component is stationary.
    With outer-controller and MPG, operator uses the machine very convenient.
    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.
    CE requirement is available



    (2014/May/7 13:37:04)]]>
    Wed, 7 May 2014 13:37:04 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SE-500D/SE-1000D)(2014/May/7 13:06:04)]]> http://www.hong-ji.com.tw/12-hole_drilling_machine.html?CID=2_2 Special for round bar material. (Four spindles mass product type, Hydraulic / pneumatic clamp)

    Special design for center-hole drillng, like eject hole, automobile parts, medical parts, ect.

    High-quality ball screw of feed-axe with Mitsubishi PLC and Yaskawa sevorcontrol, working process is stable and precision.

    The design of controller panel is user-friendly. Working parameter set up step by step on the controller panel, it is easy to use for operator.

    Slide ways are hot-treatment to hardness HRC 60 and ground way are based on mechanic cast iron. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.

    The enhanced ribs in the major construction provide the excellent rigidity for drilling big size of holes.

    With special design in fixture device( hydraulic clamp or hydraulic V-type supporter), set up workpieces are faster and easier.

    With outer-controller and MPG, operator uses the machine very convenient.

    Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.

    Four filtration systems ( paper filter, magnetic separator, filtration can and oil & chip spearator) are standard accessories to keep the oil clean.

    The excellent design of oil flow cycle provides plentiful oil to lower the temperature of drilling and drill smoothly.

     



    (2014/May/7 13:06:04)]]>
    Wed, 7 May 2014 13:06:04 +0800
    <![CDATA[Gun Drilling Machine Gun Drilling Machine (SL-300)(2014/Sep/23 10:25:54)]]> http://www.hong-ji.com.tw/Product-201132613416.html?CID=2_2 In this production line, the SL-300 model is ideal for center-hole drilling applications like automobile or aerospace parts. With three-jaw manual chucks, the clamping part is more flexible than you imagine; and for your information, the hydraulic chuck is available as well.  In order to make the operator feel more convenient, we have outer-controller and MPG design on the drilling machine. You can find more detail about the machine, and you are also very welcome to contact us for more information.  


    (2014/Sep/23 10:25:54)]]>
    Tue, 23 Sep 2014 10:25:54 +0800
    <![CDATA[BTA drilling machine BTA Drilling Machine (BL-2000)(2013/Oct/17 11:37:37)]]> http://www.hong-ji.com.tw/Product-20121119152917.html?CID=3_3 The BTA drilling machine is designed especially for round bar material with center-hole.  The machine has ball screw of feed-axe with sevor motor, which is available to support the working process goes in a stable and precise situation.  In order to ensure the ribs provides excellent rigidity for drilling holes in big size, we have automatic lubrication pump to produce well-lubricated bearing surface and screws.  

    Besides, we offer standard accessories like chip conveyor and tank filter for the BTA drilling machine to keep the oil clean, so that it can save you some cleaning time on the machine.   Moreover, the machine has excellent design of oil flow cycle to provide you plentiful oil to lower the temperature of drilling, and also provide you smooth drilling process.  



    (2013/Oct/17 11:37:37)]]>
    Thu, 17 Oct 2013 11:37:37 +0800
    <![CDATA[Gun drill Grinder Gundrill Grinder (Gundrill Grinder)(2013/Oct/17 11:35:16)]]> http://www.hong-ji.com.tw/14-drilla_head_grinders.html?CID=4_4












     

    (2013/Oct/17 11:35:16)]]>
    Thu, 17 Oct 2013 11:35:16 +0800